Why is it called It's Alive?
Because it was made within the last few days of the shuttle and only learnt Verilog within 24 hours.
If it works, it should play a cool tune over a speaker or piezo buzzer
The clock must be set to 100khz or else the speed and pitch of the song will be affected.
The reset button will restart the song.
The LED segment number will indicate the current song part, which starts at 4, finishes at 6, and loops around.
The LED segment dot, indicates song/processor activity.
If the LED segment displays 0 (zero), press the reset button.
Connect a speaker or piezo buzzer to uio[0] bi-directional pin (output)
Clock Speed: 100Khz
Reset Button: restarts tune
LED Segment: song/processor status
LED Segment == 0: press reset button
speaker or piezo buzzer
| # | Input | Output | Bidirectional |
|---|---|---|---|
| 0 | led segment a | speaker | |
| 1 | led segment b | ||
| 2 | led segment c | ||
| 3 | led segment d | ||
| 4 | led segment e | ||
| 5 | led segment f | ||
| 6 | led segment g | ||
| 7 | led segment dot |