The project was originated during the training class, "ChipCraft: The Art of Chip Design for Non-Experts" presented by eFabless.
The project utilizes techniques associated with Tiny Tapeout and Redwood EDA.
Project Title: Input DIP Switch to HEX 7-Segment Display.
This Project is a 'simple' project for inexperienced FPGA and/or inexperienced Verilog programmers. The project reads the INPUT DIP Switch on the Tiny Tapeout Demo Board and outputs the properly formatted Hex character, to the 7-Segment display which is also located on the Tiny Tapeout Demo Board.
The complete Transaction-Level Verilog code is located in the file, "DIPSwitch_7-segment.v"
The remainder of this README.md file outlines the process utilized for this project.
Select a HEX character from 1 to 16 (1 to F). Input the HEX character by using the appropriate binary value, using the DIP Switch. The HEX character you selected and input will be displayed on the 7-segment display.
List external hardware used in your project (e.g. PMOD, LED display, etc), if any
| # | Input | Output | Bidirectional |
|---|---|---|---|
| 0 | |||
| 1 | |||
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| 7 |