965 Wave Generator

965 : Wave Generator

  • Author: Michael Mayr
  • Description: Generates various functions, such as a sine wave, a sawtooth wave, a triangular wave and a squared wave.
  • GitHub repository
  • Clock: 0 Hz

How it works

The Wave Generator is a project that deals with the generation of various signals. These signals are a sine function, a triangle function, a sawtooth function and a square pulse function. The desired function, which then provides the output value, can be selected using simple control signals.

Each calculated value is generated as a 2's complement in the fixed point system Q7 and then output accordingly either via the parallel or the serial interface. An SPI interface is used for the serial output, but this can only write and not read. However, this makes it possible to connect a DAC to the wave generator in order to convert the digital signals into analogue signals.

In general, the implemented signals can be influenced by three parameters:

  • due to the internal clock frequency $f_{clk}$
  • by the phase parameter
  • by the amplitude parameter

These three parameters allow these signals to be flexibly configured in terms of their respective properties. Depending on the type of signal, however, certain restrictions must be taken into account for the parameters. These restrictions are then described in the respective section for the corresponding signal.

In addition, the sampling frequency $f_{s}$ is linked to the internal clock frequency $f_{clk}$ of the system by a factor of 40. A value therefore requires 40 clock pulses to be calculated and output via the serial interface. This results in the following relationship: $f_s = \frac{f_{clk}}{40}$. The maximum internal clock frequency $f_{clk}$ is $66 \text{;MHz}$ and therefore the maximum sampling frequency $f_{s}$ is $1.65 \text{;MHz}$.

Inputs and outputs

The Wave Generator uses all 24 digital pins. The input pins are described in the pinout section. These 8 input pins add up to the bit vector parameter. This is required to set the phase and amplitude, as the respective value is applied to it as a 2's complement in the fixed-point system Q7. The bidirectional pins "set phase" and "set amplitude" are used to adopt this value as the phase value or amplitude value in the chip.

The current value is output in parallel form on the output wave pins and in serial form on the SPI pins. The SPI pins have the same names as defined in the standard, with the exception that the input pin MISO is missing. This is not required due to the pure data generation.

The bit vector wavefrom (see pinout section) is used to select the desired function. The desired function then results depending on the bit pattern:

  • 00: Sine wave
  • 01: Square puls wave
  • 10: Sawtooth wave
  • 11: Triangular wave

The value generation can be stopped by the pin enable (see pinout section) with a LOW level and continued with a HIGH level.

Sine wave

The sine wave is generated using a Cordic algorithm, as shown in the below figure. This Cordic algorithm is used in the mode rotation and with the coordinate system circular. The following function is implemented in the Cordic algorithm: $x_n = x_0 \cos(z_0) - y_0 \sin(z_0)$ $y_n = y_0 \cos(z_0) + x_0 \sin(z_0)$ To generate a sine wave from this formula, $y_0$ must be set to 0 and $x_0$ must be loaded with the desired amplitude. The current phase $z_0$ of the sine wave is calculated in advance by a phase accumulator. This then transfers its current phase value to the Z input of the Cordic algorithm. This allows the Cordic algorithm to generate a sine wave at the Y output, which is then subsequently output.

Due to a property of the Cordic algorithm, the amplitude parameter must be scaled by a factor $k$ before loading into the chip. This factor $k$ has a value of $0.6073$. This prevents an overflow in the Q7 format and the correct values are calculated by the algorithm.

This results in the following formulae for the parameters: $ \text{Amplitude parameter} = k A$ $\text{Phase parameter} = \frac{2f}{f_s}$ Where $A \in [-1+2^{-7}, 1-2^{-7}]$ is the desired amplitude and $f \in (0, \frac{f_s}{2}]$ is the desired frequency.

Square pulse wave

The square pulse wave is again calculated with a phase accumulator and a threshold dectection unit (see figure below). The phase accumulator generates a sawtooth function $x[n]$, where the difference between one value and its subsequent value is the phase parameter. An exception occurs in the case of an overflow. In this case, the difference is much greater, as the value moves to the negative end of the number format. This generated value is then compared with the current amplitude parameter. In this case, the amplitude parameter is a threshold parameter. The output is then generated according to the following principle: If $x[n]$ is greater than the amplitude parameter, $y[n]$ has the value $1-2^{-7}$. Conversely, if $x[n]$ is less than or equal to the amplitude parameter, $y[n]$ becomes $-1+2^{-7}$.

The following formulae are required for the parameters: $ \text{Amplitude parameter} = 1-2^{-7} - (2-2^{-7})\frac{T_{on}}{T}$ $\text{Phase parameter} = \frac{2-2^{-7}}{T f_s}$ Where $T > \frac{1}{f_s}$ is the desired period duration and $T_{on} \in (0, T)$ is the desired pulse width.

Sawtooth wave

The sawtooth wave is basically generated with a phase accumulator (see figure below). The only difference is that $y[n]$ is fed back instead of $x[n]$. This makes it possible to generate a sawtooth function with a specific amplitude value. The threshold dectection unit thus ensures that the function remains in the range from minus amplitude parameter to amplitude parameter. To do this, $x[n]$ is checked and if this value is greater than the amplitude parameter, $y[n]$ is set to the negative value of the amplitude parameter. If this does not occur, $x[n]$ becomes $y[n]$.

The following formulae are required for the parameters: $ \text{Amplitude parameter} = A$ $\text{Phase parameter} = 2 A\frac{f}{f_s}$ Where $A \in [-1+2^{-7}, 1-2^{-7}]$ is the desired amplitude and $f \in (0, \frac{f_s}{2}]$ is the desired frequency.

Triangle wave

With the triangle wave, the current value is taken from the sawtooth wave and with every second overflow, therefore a change from a positive value to a negative value (see figure below), the output value is multiplied by -1.

The following formulas are required for the parameters: $ \text{Amplitude parameter} = A$ $\text{Phase parameter} = 4 A\frac{f}{f_s}$

SPI Interface

The calculated value is output serially via the SPI interface. The below timing diagram is used for this purpose. SPI is used in this project with CPOL=0 and CPHA=0. The SPI CLK requires 4 cycles of $f_{clk}$ for one cycle. The other properties can be taken from the timing diagram.

How to test

The following procedure is required to generate the desired wave:

  1. Initialisation
    • Reset the device.
    • The enable pin should be connected to LOW.
  2. Choose the desired wave
    • Set the code for the desired wave on the waveform pins.
  3. Calculate the amplitude and the phase parameter with the formulars form the above sections.
  4. Set amplitude parameter
    • Load the calculated results on the parameter pins
    • Then send a puls to the set amplitude pin
  5. Set phase parameter
    • Load the calculated results on the parameter pins
    • Then send a puls to the set phase pin
  6. Enable the output generation
    • The enable pin should be connected to HIGH.
  7. Now the chip generates the desired wave and output the values on the parallel and serial interface.

External hardware

Through the SPI interface it is possible to get an analogue signal through a suitable DAC. However, this DAC must fulfill the requirements of the SPI interface.

IO

#InputOutputBidirectional
0parameter bit 0 (LSB)output wave bit 0(input) enable pin
1parameter bit 1output wave bit 1(input) waveform bit 0 pin
2parameter bit 2output wave bit 2(input) waveform bit 1 pin
3parameter bit 3output wave bit 3(input) set phase pin
4parameter bit 4output wave bit 4(input) set amplitude pin
5parameter bit 5output wave bit 5(output) spi cs pin
6parameter bit 6output wave bit 6(output) spi mosi pin
7parameter bit 7 (MSB)output wave bit 7(output) spi clk pin

Chip location

Controller Mux Mux Mux Mux Mux Mux Mux Mux Mux Mux Mux Analog Mux Mux Mux Mux Mux Mux Mux Mux Mux Mux Mux Analog Mux Mux Mux Mux Mux Mux Mux Mux Mux Mux tt_um_chip_rom (Chip ROM) tt_um_factory_test (TinyTapeout 06 Factory Test) tt_um_analog_factory_test (TT06 Analog Factory Test) tt_um_analog_factory_test (TT06 Analog Factory Test) tt_um_urish_charge_pump (Dickson Charge Pump) tt_um_psychogenic_wowa (WoWA) tt_um_oscillating_bones (Oscillating Bones) tt_um_kevinwguan (Crossbar Array) tt_um_coloquinte_moosic (Moosic logic-locked design) tt_um_alexsegura_pong (Pong) tt_um_iron_violet_simon (Iron Violet) tt_um_tomkeddie_a (VGA Experiments in Tennis) tt_um_MichaelBell_tinyQV (TinyQV Risc-V SoC) tt_um_andychip1_sn74169 (sn74169) tt_um_mattvenn_r2r_dac (Analog 8bit R2R DAC) tt_um_thorkn_audiochip_v2 (AudioChip_V2) tt_um_faramire_gate_guesser (Gate Guesser) tt_um_urish_simon (Simon Says game) tt_um_TT06_SAR_wulffern (TT06 8-bit SAR ADC) tt_um_soundgen (soundgen) tt_um_ledcontroller_Gatsch (ledcontroller) tt_um_digitaler_filter_rathmayr (Digitaler Filter) tt_um_histefan_top (Snake Game) tt_um_mayrmichael_wave_generator (Wave Generator) tt_um_advanced_counter (jku-tt06-advanced-counter) tt_um_FanCTRL_DomnikBrandstetter (PI-Based Fan Controller) tt_um_ps2_morse_encoder_top (PS/2 Keyboard to Morse Code Encoder) tt_um_calculator_muehlbb (16-bit calculator) tt_um_hpretl_tt06_tempsens (Temperature Sensor NG) tt_um_haeuslermarkus_fir_filter (FIR Filter with adaptable coefficients) tt_um_mattvenn_rgb_mixer (RGB Mixer demo) tt_um_analog_loopback (Analog loopback) tt_um_entwurf_integrierter_schaltungen_hadner (Projekt KEIS Hadner Thomas) tt_um_seven_segment_fun1 (7-segment-FUN) tt_um_moving_average_master (Moving average filter) tt_um_rgbled_decoder (SPI to RGBLED Decoder/Driver) tt_um_4bit_cpu_with_fsm (4-Bit CPU mit FSM) tt_um_flappy_bird (Flappy Bird) tt_um_drops (drops) tt_um_enieman (UART-Programmable RISC-V 32I Core) tt_um_gabejessil_timer (2 Player Game) tt_um_wokwi_384804985843168257 (playwithnumbers) tt_um_wokwi_384711264596377601 (luckyCube) tt_um_hpretl_tt06_tdc (Synthesized Time-to-Digital Converter (TDC)) tt_um_wokwi_384437973887503361 (Asynchronous Down Counter) tt_um_spi_pwm_djuara (spi_pwm) tt_um_SteffenReith_PiMACTop (PiMAC) tt_um_mattvenn_relax_osc (Relaxation oscillator) tt_um_jv_sigdel (1st passive Sigma Delta ADC) tt_um_wokwi_392873974467527681 (PILIPINAS) tt_um_scorbetta_goa (GOA - grogu on ASIC) tt_um_sanojn_ttrpg_dice (TTRPG Dice + simple I2C peripheral) tt_um_urish_dffram (DFFRAM Example (128 bytes)) tt_um_lucaz97_monobit (Monobit Test) tt_um_noritsuna_i4004 (i4004 for TinyTapeout) tt_um_hpretl_tt06_tdc_v2 (Synthesized Time-to-Digital Converter (TDC) v2) tt_um_vaf_555_timer (A 555-Timer Clone for Tiny Tapeout 6) tt_um_obriensp_be8 (8-bit CPU with Debugger (Lite)) tt_um_toivoh_retro_console (Retro Console) tt_um_mattvenn_inverter (Double Inverter) tt_um_SteffenReith_ASGTop (ASG) tt_um_lucaz97_rng_tests (rng Test) tt_um_dieroller_nathangross1 (Die Roller) tt_um_kwilke_cdc_fifo (Clock Domain Crossing FIFO) tt_um_spiff42_exp_led_pwm (LED PWM controller) tt_um_devinatkin_fastreadout (Fast Readout Image Sensor Prototype) tt_um_ja1tye_tiny_cpu (Tiny 8-bit CPU) tt_um_7seg_animated (Animated 7-segment character display) tt_um_neurocore (Neurocore) tt_um_zhwa_rgb_mixer (RGB Mixer) tt_um_wokwi_394704587372210177 (Cambio de giro de motor CD) tt_um_ian_keypad_controller (Keypad controller) tt_um_urish_spell (SPELL) tt_um_vks_pll (PLL blocks) tt_um_fountaincoder_top (multimac) tt_um_dsatizabal_opamp (Simple FET OpAmp with Sky130.) tt_um_obriensp_be8_nomacro (8-bit CPU with Debugger) tt_um_LFSR_shivam (10-bit Linear feedback shift register) tt_um_shivam (Pulse Width Modulation) tt_um_algofoogle_tt06_grab_bag (TT06 Grab Bag) tt_um_meiniKi_tt06_fazyrv_exotiny (FazyRV-ExoTiny) tt_um_wokwi_394888799427677185 (4-bit stochastic multiplier traditional) tt_um_QIF_8bit (8 Bit Digital QIF) tt_um_MATTHIAS_M_PAL_TOP_WRAPPER (easy PAL) tt_um_andrewtron3000 (Rule 30 Engine!) tt_um_tommythorn_4b_cpu_v2 (Silly 4b CPU v2) tt_um_aerox2_jrb8_computer (The James Retro Byte 8 computer) tt_um_wokwi_394898807123828737 (4-bit Stochastic Multiplier Compact with Stochastic Resonator) tt_um_argunda_tiny_opamp (Tiny Opamp) tt_um_fdc_chip (Frequency to digital converters (asynchronous and synchronous)) tt_um_8bit_cpu (8-Bit CPU In a Week) tt_um_mitssdd (co processor for precision farming) tt_um_fstolzcode (Tiny Zuse) tt_um_liu3hao_rv32e_min_mcu (tt06-RV32E_MinMCU) tt_um_kianV_rv32ima_uLinux_SoC (KianV uLinux SoC) tt_um_wokwi_395444977868278785 (*NOT WORKING* HP 5082-7500 Decoder) tt_um_wokwi_394618582085551105 (Keypad Decoder) tt_um_wokwi_395054820631340033 (Workshop Hackaday Juli) tt_um_wokwi_395055035944909825 (Some_LEDs) tt_um_wokwi_395055351144787969 (Hack a day Tiny Tapeout project) tt_um_wokwi_395054823569451009 (First TT Project) tt_um_wokwi_395054823837887489 (Dice) tt_um_wokwi_395055341723330561 (Workshop_chip) tt_um_jduchniewicz_prng (8-bit PRNG) tt_um_wokwi_395054564978002945 (Bestagon LED matrix driver) tt_um_wokwi_395054466384583681 (1-Bit ALU 2) tt_um_wokwi_395058308283408385 (test for tiny tapeout hackaday) tt_um_s1pu11i_simple_nco (Simple NCO) tt_um_wokwi_395055359324730369 (Tiny_Tapeout_6_Frank) tt_um_disp1 (Display test 1) tt_um_pckys_game (PCKY´s Successive Approximation Game) tt_um_tiny_shader_mole99 (Tiny Shader) tt_um_wokwi_393815624518031361 (My Chip) tt_um_minibyte (Minibyte CPU) tt_um_emilian_rf_playground (IDAC8 based on divide current by 2) tt_um_triple_watchdog (Triple Watchdog) tt_um_wokwi_395142547244224513 (EFAB Demo 2) tt_um_chisel_hello_schoeberl (Chisel Hello World) tt_um_aiju_8080 (8080 CPU) tt_um_wokwi_395134712676183041 (Inverters) tt_um_nubcore_default_tape (DEFAULT) tt_um_wuehr1999_servotester (Servotester) tt_um_wokwi_395055722430895105 (Servo Signal Tester) tt_um_exai_izhikevich_neuron (Izhikevich Neuron) tt_um_lisa (LISA 8-Bit Microcontroller) tt_um_wokwi_394707429798790145 (32-Bit Galois Linear Feedback Shift Register) tt_um_CKPope_top (X/Y Controller) tt_um_MNSLab_BLDC (Universal Motor and Actuator Controller) tt_um_couchand_dual_deque (Dual Deque) tt_um_JamesTimothyMeech_inverter (Programmable Thing) tt_um_signed_unsigned_4x4_bit_multiplier (Signed Unsigned multiplyer) tt_um_lipsi_schoeberl (Lipsi: Probably the Smallest Processor in the World) tt_um_i_tree_batzolislefteris (Anomaly Detection using Isolation trees) tt_um_wokwi_394830069681034241 (Cyclic Redundancy Check 8 bit) tt_um_rng_3_lucaz97 (RNG3) tt_um_wokwi_395263962779770881 (Bivium-B Non-Linear Feedback Shift Register) tt_um_dvxf_dj8 (DJ8 8-bit CPU) tt_um_silicon_tinytapeout_lm07 (Digital Temperature Monitor) tt_um_htfab_flash_adc (Flash ADC) tt_um_chisel_pong (Chisel Pong) tt_um_wokwi_395414987024660481 (HELP for tinyTapeout) tt_um_jorgenkraghjakobsen_toi2s (SPDIF to I2S decoder) tt_um_cmerrill_pdm (Parallel / SPI modulation tester) tt_um_csit_luks (CSIT-Luks) tt_um_wokwi_395357890431011841 (Trivium Non-Linear Feedback Shift Register) tt_um_drburke3_top (SADdiff_v1) tt_um_cejmu_riscv (TinyRV1 CPU) tt_um_rejunity_current_cmp (Analog Current Comparator) tt_um_loco_choco (BF Processor) tt_um_qubitbytes_alive (It's Alive) tt_um_wokwi_395061443288867841 (BCD to single 7 segment display Converter) tt_um_SJ (SiliconJackets_Systolic_Array) tt_um_ejfogleman_smsdac (8-bit DEM R2R DAC) tt_um_wokwi_395055455727667201 (Hardware Trojan Part II) tt_um_ericsmi_weste_problem_4_11 (Measurement of CMOS VLSI Design Problem 4.11) tt_um_wokwi_395034561853515777 (2 bit Binary Calculator) tt_um_mw73_pmic (Power Management IC) tt_um_Counter_1_shivam (8-bit Binary Counter) tt_um_wokwi_395054508867644417 (SynchMux) tt_um_otp_encryptor (TT06 OTP Encryptor) tt_um_wokwi_395514572866576385 (Parity Generator) tt_um_ADPCM_COMPRESSOR (ADPCM Encoder Audio Compressor) tt_um_3515_sequenceDetector (Sequence detector using 7-segment) tt_um_faramire_stopwatch (Simple Stopwatch) tt_um_ks_pyamnihc (Karplus-Strong String Synthesis) tt_um_dlmiles_muldiv8 (MULDIV unit (8-bit signed/unsigned)) tt_um_dlmiles_muldiv8_sky130faha (MULDIV unit (8-bit signed/unsigned) with sky130 HA/FA cells) tt_um_tommythorn_ncl_lfsr (NCL LFSR) tt_um_lk_ans_top (ANS Encoder/Decoder) tt_um_MichaelBell_latch_mem (Latch RAM (64 bytes)) tt_um_wokwi_395179352683141121 (Combination Lock) tt_um_Uart_Transciver (UART Transceiver) tt_um_dgkaminski (4-Bit ALU) tt_um_DigitalClockTop (TDM Digital Clock) tt_um_wokwi_394640918790880257 (IFSC Keypad Locker) tt_um_wokwi_395355133883896833 (BIT COMPARATOR) tt_um_alu (SumLatchUART_System) tt_um_alfiero88_VCII (VCII) tt_um_ALU (3-bit ALU) tt_um_topTDC (Convertidor de Tiempo a Digital (TDC)) tt_um_UABCReloj (24 H Clock) tt_um_CDMA_Santiago (CDMA_2024) tt_um_dr_skyler_clock (Clock) tt_um_motor (motor a pasos) tt_um_mult_2b (mult_2b) tt_um_CodHex7seg (Decodificador binario a display 7 segmentos hexadecimal) tt_um_S2P (Serial to Parallel Register) tt_um_PWM (PWM) tt_um_ss_register (serie_serie_register) tt_um_stepper (Stepper) tt_um_g3f (Generador digital trifásico) tt_um_ALU_DECODERS (ALU with a Gray and Octal decoders) tt_um_ram (4 bit RAM) tt_um_sap_1 (SAP-1 Computer) tt_um_guitar_pedal (Integrated Distorion Pedal) tt_um_mbalestrini_usb_cdc_devices (Two ports USB CDC device) tt_um_adammaj (Tiny ALU) tt_um_wokwi_395567106413190145 (4-Bit Full Adder and Subtractor with Hardware Trojan) tt_um_gak25_8bit_cpu_ext (Most minimal extension of friend's 'CPU In a Week' in a day) tt_um_hsc_tdc (UCSC HW Systems Collective, TDC) tt_um_BoothMulti_hhrb98 (UACJ-MIE-Booth 4) tt_um_dlmiles_poc_fskmodem_hdlctrx (FSK Modem +HDLC +UART (PoC)) tt_um_simplez_rcoeurjoly (tt6-simplez) tt_um_nurirfansyah_alits01 (Analog Test Circuit ITS: VCO) tt_um_ppca (drEEm tEEm PPCA) tt_um_wokwi_395522292785089537 (Displays CIt) tt_um_fpu (Dgrid_FPU) tt_um_duk_lif (Leaky Integrate and fire neuron(LIF)) tt_um_bomba1 (Latin_bomba) tt_um_chatgpt_rsnn_paolaunisa (ChatGPT designed Recurrent Spiking Neural Network) tt_um_bit_ctrl (Bit Control) tt_um_array_multiplier_hhrb98 (Array Multiplier) tt_um_wallace_hhrb98 (UACJ-Wallace multiplier) tt_um_I2C_to_SPI (TinyTapeout SPI Master) tt_um_rng (Random number generator) tt_um_wokwi_395599496098067457 (EVEN AND ODD COUNTERS) tt_um_8bitALU (8bit ALU) tt_um_aleena (Analog Sigmoid) tt_um_rejunity_1_58bit (Ternary 1.58-bit x 8-bit matrix multiplier) tt_um_rejunity_fp4_mul_i8 (FP4 x 8-bit matrix multiplier) tt_um_PWM_Controller (PWM Controller) tt_um_couchand_cora16 (CORA-16) tt_um_frq_divider (clk frequency divider controled by rom) tt_um_wokwi_390913889347409921 (Notre Dame Dorms LED) tt_um_timer_counter_UGM (4-Digit Scanning Digital Timer Counter) tt_um_koconnor_kstep (kstep) tt_um_lancemitrex (DIP Switch to HEX 7-segment Display) tt_um_PWM_Sine_UART (PWM_Sinewave_UART) tt_um_nicklausthompson_twi_monitor (TWI Monitor) tt_um_wokwi_395615790979120129 (Cambio de giro de motor CD) tt_um_ancho (Circuito PWM con ciclo de trabajo configurable) tt_um_wokwi_395618714068432897 (32b Fibonacci Original) tt_um_voting_thingey (Voting thingey) tt_um_hsc_tdc_buf (UCSC HW Systems Collective, TDC - BUF2x1) tt_um_hsc_tdc_mux (UCSC HW Systems Collective, TDC - MUX2x1) tt_um_petersn_micro1 (14 Hour Simple Computer) tt_um_sanojn_tlv2556_interface (UART interface to ADC TLV2556 (VHDL Test)) tt_um_gray_sobel (Gray scale and Sobel filter) tt_um_wokwi_395614106833794049 (Universal gates) Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available